TexasBusinessesNear Me

Plumbers in Georgetown

Georgetown's permit rules follow its water lines: even outside city limits, a home that gets water, wastewater or electricity from the City of Georgetown still needs a city building permit for plumbing work. Ask the plumber to pull it in MGO Connect, and check the Responsible Master Plumber's license with TSBPE.
#2

⭐ 5.0 · 108 reviews

2508 Williams Dr #201, Georgetown, TX 78628

#3

⭐ 4.9 · 575 reviews

104 Country Rd, Georgetown, TX 78628

#4

⭐ 4.9 · 442 reviews

2200 S Church St Unit 7, Georgetown, TX 78626

#5
#6

⭐ 4.9 · 266 reviews

1500 W University Ave Ste 110, Georgetown, TX 78628

#7

⭐ 4.9 · 156 reviews

501 S Austin Ave Fl 2 office 72, Georgetown, TX 78626

#10

⭐ 4.8 · 454 reviews

1616 Williams Dr Ste 101, Georgetown, TX 78628

How we picked: this list ranks plumbers by a weighted score of their Google rating and review count, last collected June 30, 2026. Our terms of service explain how rankings and Featured spots work.

Georgetown plumbing permits and inspections

Georgetown requires a permit to install or replace plumbing systems, and permits and inspections run through My Government Online (MGO Connect). State law says the same thing from the other direction: cities of more than 5,000 people must require plumbing permits, water heaters included, apart from small jobs like fixing leaks or replacing faucets, toilets or disposals.

If you live in the ETJ or the county, city permits still apply when Georgetown provides your water, wastewater or electricity. Georgetown Water serves ZIP codes including 78626, 78628, 78633, 78641, 78642 and 76527, though not every address in those ZIPs is a city customer, so check your water bill.

When a job needs residential plan review, such as an addition with new plumbing, allow 15 to 20 business days. Before issuing the permit, the city must confirm with TSBPE that the Responsible Master Plumber has insurance on file, and a licensed plumbing inspector checks the work. Ask the city's development services staff whether Georgetown also asks plumbers to register.

How to check a Georgetown plumber

Any company that advertises plumbing in Texas must have a Responsible Master Plumber (RMP), who keeps at least $300,000 of liability insurance on file with TSBPE and is responsible for permits, inspections and a licensed crew. Look for the RMP's name and license number, plus TSBPE's name, address and phone, on the written proposal and the final invoice; state rules require both. Then search the RMP on TSBPE's Public License Search or its Find-a-Plumber map.

Service vans should show the company name and the RMP's license number, and the plumber in your kitchen should be carrying a license or registration card. Complaints go to TSBPE on its General Complaint Form, (512) 936-5200.

Georgetown plumber costs and irrigation limits

HomeGuide's national numbers: $45 to $150 an hour, $125 to $450 for an average job, $50 to $200 for a service call, and $400 to $2,000 to repair a burst pipe. Use these to judge Georgetown quotes, and ask whether the MGO Connect permit fee is included. Detailed pricing is on the Texas plumbing guide.

When checked on October 22, 2026, Georgetown Water customers were in Drought Stage 1: irrigation on two days a week by address, never on Mondays and never between 9 a.m. and 7 p.m. Check the city's water conservation page for the current stage. A broken sprinkler head or a leaking zone wastes your allowed hours, so fix it early. Backflow assemblies on irrigation lines must be tested or repaired by someone with a TCEQ Backflow Prevention Assembly Tester license.

Pair a water heater swap with a check from Georgetown electricians if you are moving to an electric unit, since a plumber may only reconnect an appliance on an existing circuit. City-wide rules are on the Georgetown hub, and Round Rock plumbers work under a one-permit portal.

Georgetown plumber FAQs

Do I need a Georgetown permit if I live in the ETJ?+

Yes, when the City of Georgetown provides your water, wastewater or electricity. Ask the plumber to confirm the permit in MGO Connect.

How do I verify a Georgetown plumber's license?+

Take the Responsible Master Plumber's license number from your quote and search it on TSBPE's Public License Search.

Can I water during Stage 1 after a sprinkler repair?+

While Stage 1 is in effect, only on your two address-based days, never on Mondays and never between 9 a.m. and 7 p.m. Hand watering with a hose or bucket is allowed any time.